China Good quality CZPT Aluminum Alloy 2.5 Inch 3 Inch Machino Fire Hose Coupling with Fire Hose coupling bushing

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Click Here

Product Description

Product Description

Machino Coupling
KDK type hose interface is a kind of interface commonly used in fire fighting work, which is mainly used for the connection between hose for a long time. It is a fast interface which is inserted by the elastic claw of male interface and female interface, and can be quickly released by using falling ring, which has the advantages of simple connection and rapid release. Can be equipped in a variety of fire engines, fire boats, seagoing ships, oil drilling platforms.

Fire hose couplings Features:
1) Nominal diameter: 50mm
2) Coupling  Working pressure: 0.8-1.6MPa
3) Applicable media: water, foam

TYPE: German / American / Russian / BS Fire Coupling  

Model KD KY KN KJ
Diameter(mm) DN
50
DN
65
DN80 DN50 DN65 DN50 DN65 DN50/
DN65
DN65/ DN80
Working Pressure(MPa) 0.8-1.6
Testing Pressure(Mpa) 2.4-4.8
Available Medium Clear water, foam mixed liquid

PVC Lining/ TPU Lining/ Rubber CZPT Fire Hose
1)The CZPT of fire hose is PVC, TPU or Copy Rubber . And the jacket of fire fighting hose is woven by high intensity of polyester filament or polyester short-fiber( twill/plain ).

2)There are special adhesive ( CZPT or liquid)between the jacket and the hose. The canvas  hose is soft and highly polished, reduce the flow resistance 

3) The fire hose is thinner and softer, lighter and more convenient to use. 
4) The fire  hose is  high pressure resistance, low temperature resistance, anti-corrosion,aging resistance,wear-resisting.
5) We supply different color CZPT of fire hose : blue, black, transparent, etc or according to your requirement

6) We supply different  length of  firehose : 10m – 30m or according to your requirement

7)The fire hose is packed by poly bag and cartons.

8)The quality of  fire hose is guranteed by CCCF, ISO9001:2008

9)The hose use in fire fighting or agriculture

10) Packing by bags or cartons

Technical Data:
 

Diameter
(/mm)
working pressure
(Mpa/bar/psi)
tesing pressure
(Mpa/bar/psi)
buring pressure
(Mpa/bar/psi)
length(m)
19 0.8/ 8/120

1.0/10/150

1.3/13/195

1.6/16/240

2.0/20/300

2.5/20/375

4.0/40/600

1.2/12/180

1.5/15/220

2.0/20/300

2.4/24/360

3.0/30/450

3.7/37/555

6/60/900

2.4/24/350

3.0/30/450

3.9/39/380

4.8/48/720

6.0/60/900

7.5/75/1125

12/120/1800

10

15

20

25

30

25
40
50
65
80
100
125
150
200
250
300
400



 

Company Profile

Successful Cases

 

FAQ

Choosing us is the right decision!

1. Are you a factory or trading company?
    We are a professional manufacturer. We warmly welcome clients from CZPT to visit our factory
    and cooperate with us. We can offer OEM & ODM service.

2. Can you produce goods with special specification ?
   Our company focuses on customized products.First of all, we need to know the specification in details,   and then we need to check with our technology department. We will give customers satisfying reply as soon as possible.

3.  How long is the delivery time?
    30-45 days after the advance payment.

4. What’s your advantage?
    Independent R&D team,professional production and sales team,great production capacity sustainable      supply.Use the best material and production process.Low defective rate.

5. How can we guarantee quality?
   Always a pre-production sample before mass production;
   Always final Inspection before shipment;

 

You may also like

 

 

 

 

Certification: CCCF, ISO9001
Surface Treatment: Zinc Plated
Material: Aluminum or Brass
Application Medium: Clean Water ,Foam Mixture Liquid
Strength Test Pressure: 2.4-4.8MPa
Working Pressure: 0.8-1.6MPa
Samples:
US$ 6/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Types of Coupling

A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.

Flexible beam coupling

Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.

Magnetic coupling

Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.

Shaft coupling

A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
gearbox

Overload safety mechanical coupling

Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
gearbox

CZPT Pulley

The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
China Good quality CZPT Aluminum Alloy 2.5 Inch 3 Inch Machino Fire Hose Coupling with Fire Hose   coupling bushingChina Good quality CZPT Aluminum Alloy 2.5 Inch 3 Inch Machino Fire Hose Coupling with Fire Hose   coupling bushing
editor by CX 2023-07-11

disc coupling

As one of leading disc coupling manufacturers, suppliers and exporters of products, We offer disc coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of disc coupling

Recent Posts