DC MOTOR PUMP GROUP 1
Standard Description
Consisting of a hefty duty DC motor plus the CB1S gear pump, this pump motor group is an best hydraulic power unit for mobile hydraulic equipments, this kind of as auto carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Basic Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and examine valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump consists of a four.5″ DC motor plus a CBSR gear pump which has a standard power up/gravity down circuit by using a relief valve, a check valve in addition to a solenoid release valve.
Exclusive Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned ahead of mounting the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~68 cst, which really should also be clean and free of impurities. N46 hydraulic oil is advised.
four. The power unit must be mounted horizontally.
5. The relief valve stress is preset about 25% increased compared to the working stress.
six. Flow management valve for lowing speed adjustment is obtainable unpon request.