Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is built to operate materials dealing with tools. The lowering movement is achived through the solenoid valve with all the reducing pace controlled by an adjustable needle valve. The left and appropriate functions are equipped using a dual pilot operated examine valve and cross-over relief valves.
Remark: Please talk to our revenue engineer for your unique pump displacement, motor energy or tank capability.
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic elements concerned ahead of set up of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities.N46 hydraulic oil is suggested.
4. This electrical power unit should be mounted horizontal.
5. Check the oil degree in the tank immediately after the very first start off with the energy unit.
six. Oil modifying is needed immediately after the initial a hundred operation hours, afterwards once every 3000 hours.
SNOW PLOW Electrical power UNIT
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.