Equipped with the zero leak bidirectional checking sole-noid valves, this energy unit is intended for the operation of two independent circuits. Which are respectively to the most important and subordinate platforms on the double scissors lift. Two cut-off valves are used for reducing the machine manually in situation of energy loss. If much more independent circuits are essential for the application please get hold of us for availability.
Remark: one. Please talk to our income engineer for that different pump displacement, motor energy or tank capacity.
two. CSA or UL licensed motors are available upon request.
one. The AC motor is of S3 duty cycle, which could only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic components concerned before set up of the energy unit.
three. Viscosity on the oil shoud be 15~46 cst,along with the oil must be clean and totally free of impurities,N46 hydraulic oil is advised.
four. The energy unit ought to be mounted vertically.
five. Check the oil degree while in the tank right after the original operating of the electrical power unit.
six. Oil modifying is needed immediately after the first a hundred operation hrs,afterwards after every single 3000 hours.
Energy UNITS FOR DOUBLE-SCISSORS LIFT
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.