This standard selection of Servo-Worm Reducers are perfect for use in applications that demand powerful, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo engine technology, providing limited integration of the engine to the machine. Angular backlash of less than 1 arc-minutes is provided standard.

They are available in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of motor couplings and installation flanges are available for assembly to virtually all servo motors, and the hollow bore result can be used to mount result shafts, pinion shafts, or other drive elements.

Regular applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque selection of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable set up space.

The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors give you excellent attenuation properties for the procedure of your systems with low levels of vibration. This is because of the longitudinal software of power on the insight shaft. This allows torque impulses to be prevented effectively and for maximum results in conditions of running smoothness and noise reduction to be achieved.

Both the gear unit, and the synchronous servomotor are based on our modular program. This enables you to have completely individual configuration opportunities for every application. One matter is certain – Our servo gearmotors are actual specialists for very particular requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, speed reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a equipment in the form of a screw, also referred to as a worm, meshes with a worm equipment. These gears are typically made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A main benefit of worm equipment reducers is that they produce an output that is 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to improve the path of the output, a left-hand thread worm gearbox is necessary.
At times a motor’s capability may be limited to the main point where it needs gearing. As servo manufacturers develop better motors that can muscle mass applications through more complicated moves and create higher torques and speeds, these motors need gearheads add up to the task.

Taper lock sprocket